Configure a remote connector server RCS

RCS runs in one of two modes:

Client mode: In client mode, RCS initiates the connection with IDM. Run the RCS in client mode if you need to communicate with a system that is behind a firewall and IDM is outside that firewall (such as Advanced Identity Cloud).

The following diagram shows an RCS in client mode:
Server mode: In server mode, RCS acts as the server, with IDM acting as a client. IDM initiates the connection with the RCS. Run the RCS in server mode if IDM can initiate the connection.

The following diagram shows an RCS in server mode:

This example shows how to retrieve the RCS types over REST:

List the RCS types

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--request POST \
"http://localhost:8080/openidm/system?_action=availableConnectorServers"
{
  "connectorServers": [
    {
      "displayName": "Remote Connector Server",
      "systemType": "provisioner.openicf",
      "type": "remoteConnectorServer"
    },
    {
      "displayName": "Remote Connector Servers Group",
      "systemType": "provisioner.openicf",
      "type": "remoteConnectorServersGroup"
    },
    {
      "displayName": "Remote Connector Server in Client mode",
      "systemType": "provisioner.openicf",
      "type": "remoteConnectorClient"
    },
    {
      "displayName": "Remote Connector Servers Group in Client mode",
      "systemType": "provisioner.openicf",
      "type": "remoteConnectorClientsGroup"
    }
  ]
}

RCS configuration properties

The following table displays the complete list of RCS configuration properties with truncated property names for readability. The full name for each property is prefixed with connectorserver. in the conf/ConnectorServer.properties configuration file included with RCS.

Time interval properties

The default values for the nameInterval and webSocketConnections properties are suitable for most RCS deployments. Do not adjust these property values without specific guidance from Ping.

Property RCS Mode (Server or Client) Description Example

connectorServerName

Client

Name of the remote connector client. This name is used to identify the remote connector server in the list of connector reference objects. The name must be lower case alphanumeric characters (^[a-z0-9]*$), and must match the name property in the provisioner.openicf.connectorinfoprovider.json file on your IDM server.

rcs1

url

Client

URL of the server on which IDM runs. This property can have multiple values. When using multiple values, separate each address with a space.

wss://openidm.example.com:8443/openicf ^[1]

1. Note the wss (WebSocket transport protocol) and the openicf endpoint.

hostId

Client

Unique identifier for the RCS.

MY_UNIQUE_RCS_HOST_ID

proxyHost

Client

Proxy server host.

proxyPort

Client

Proxy server port number.

proxyPrincipal

Client

Proxy server principal.

proxyPassword

Client

Proxy server password.

housekeepingInterval

Client

Interval at which RCS checks WebSockets to determine if they should be closed and recycled according to the specified interval, in seconds.

groupCheckInterval

Client

Interval at which RCS checks WebSocket connection groups (group of WebSocket connections associated with the same IDM <-> RCS link) to see if they should be closed, in seconds. WebSocket connection groups are closed when they no longer contain any active WebSocket connections.

webSocketConnections

Client

Number of WebSocket connections to open.

connectionTtl

Client

Time to live of a WebSocket connection, in seconds.

newConnectionsInterval

Client

Interval at which RCS establishes new WebSocket connections, in seconds. Ensures that connection establishment is staggered.

tokenEndpoint

Client

Token endpoint from which to retrieve the access token if you are using OAuth2 to authenticate against AM.

https://am.example.com/am/oauth2/realms/root/access_token

scope

Client

OAuth2 token scope, if you are using OAuth2 to authenticate against AM.

fr:idm:*

clientId

Client

OAuth2 Client ID for which to request an access token.

connectorServer

If the RCS is authenticating against AM, you must update your IDM authentication configuration (in conf/authentication.json). Add a user mapping for this client ID in the rsFilter authentication module configuration. For more information, refer to Authenticate through AM.

clientSecret

Client

OAuth2 Client Secret.

openidm

pingPongInterval

Both

Interval at which RCS sends ping/pong messages between IDM <-> RCS, in seconds. Used to determine health/connectivity of the underlying WebSocket connection. The purpose of the ping is to keep connections alive (for firewalls or load balancers that honor connections in use). If your firewall or load balancer doesn’t honor connections in use (that is, connections are timed out, regardless of their usage), the ping has no effect, and you should disable it. Set this property to 0 to disable the ping.

300

trustStoreFile

Both

The IDM truststore file. You do not need to set this property if the IDM certificate is a CA-signed certificate.

security/truststore.pkcs12

trustStoreType

Both

The IDM truststore type. You do not need to set this property if the IDM certificate is a CA-signed certificate.

PKCS12

trustStorePass

Both

The IDM truststore password. You do not need to set this property if the IDM certificate is a CA-signed certificate.

changeit

keyStoreFile

Both

The IDM keystore file. You do not need to set this property if the IDM certificate is a CA-signed certificate.

security/keyStore.pkcs12

keyStoreType

Both

The IDM keystore type. You do not need to set this property if the IDM certificate is a CA-signed certificate.

PKCS12

keyStorePass

Both

The IDM keystore password. You do not need to set this property if the IDM certificate is a CA-signed certificate.

changeit

keyPass

Both

The IDM certificate password. You do not need to set this property if the IDM certificate is a CA-signed certificate.

changeit

libDir

Both

Directory on the RCS host in which connector library file dependencies are located (relative to /path/to/openicf/).

lib

bundleDir

Both

Directory on the RCS host in which connector .jar files are located (relative to /path/to/openicf/).

connectors

loggerClass

Both

The RCS logger class.

org.forgerock.openicf.common.logging.slf4j.SLF4JLog

loggingConfigFile

Both

The path to the RCS logging configuration file. The path can be absolute or relative to /path/to/openicf/. The default value is conf/logback.xml.

/path/to/dir/filename.xml

principal

Both

Principal to authenticate to the RCS. This property is not used if the RCS obtains its access token through PingAM (AM) (which is the case when using Advanced Identity Cloud).

anonymous

password

Both

Password to authenticate to the RCS. This property is not used if the RCS obtains its access token through AM (which is the case when using Advanced Identity Cloud.

changeit

usessl

Server

Whether the connection between IDM and the RCS should be over SSL.

false/true

port

Server

Port on which the RCS listens for the connection from IDM.

8759

Certain configuration properties are dependent on the RCS mode. For more information, refer to Configure a Remote Connector Server (RCS).

Sample ConnectorServer.properties file for client mode

connectorserver.url=wss://my-tenant.forgeblocks.com:8443/openicf
connectorserver.connectorServerName=myConnectorServer
connectorserver.hostId=MY_UNIQUE_RCS_HOST_ID
connectorserver.pingPongInterval=60
connectorserver.housekeepingInterval=20
connectorserver.groupCheckInterval=60
connectorserver.webSocketConnections=3
connectorserver.connectionTtl=300
connectorserver.newConnectionsInterval=10
connectorserver.tokenEndpoint=https://my-tenant.forgeblocks.com/am/oauth2/realms/root/realms/alpha/access_token
connectorserver.clientId=my-client-id
connectorserver.clientSecret=my-client-secret
connectorserver.trustStoreFile=security/truststore.pkcs12
connectorserver.trustStoreType=PKCS12
connectorserver.trustStorePass=changeit
connectorserver.keyStoreFile=security/keyStore.pkcs12
connectorserver.keyStoreType=PKCS12
connectorserver.keyStorePass=changeit
connectorserver.keyPass=changeit
connectorserver.scope=fr:idm:*
connectorserver.bundleDir=connectors
connectorserver.libDir=lib
connectorserver.loggerClass=org.forgerock.openicf.common.logging.slf4j.SLF4JLog
connectorserver.loggingConfigFile=conf/logback.xml

Sample ConnectorServer.properties file for server mode

connectorserver.port=8759
connectorserver.pingPongInterval=60
connectorserver.principal=anonymous
connectorserver.password=changeit
connectorserver.usessl=true
connectorserver.trustStoreFile=security/truststore.pkcs12
connectorserver.trustStoreType=PKCS12
connectorserver.trustStorePass=changeit
connectorserver.keyStoreFile=security/keyStore.pkcs12
connectorserver.keyStoreType=PKCS12
connectorserver.keyStorePass=changeit
connectorserver.keyPass=changeit
connectorserver.bundleDir=connectors
connectorserver.libDir=lib
connectorserver.key=lmA6bMfENJGlIDbfrVtklXFK32s\=
connectorserver.loggerClass=org.forgerock.openicf.common.logging.slf4j.SLF4JLog
connectorserver.loggingConfigFile=conf/logback.xml

ICFServlet configuration options

You can configure the following optional ICFServlet settings in your conf/provisioner.openicf.connectorinfoprovider.json file:

maxMessageSize: Integer.

You can set a maximum message size in kilobytes. The default is 20MB.
idleTimeout: Integer.

The maximum time, in minutes, that a WebSocket connection can be idle before it is removed. The default is 15 minutes.

Example provisioner.openicf.connectorinfoprovider.json:

{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "ICFServlet": {
    "maxMessageSize": 40960,
    "idleTimeout": 23
  },
  ...
}

Configure RCS in client mode

The RCS configuration will differ between server mode and client mode. Refer to RCS Properties for a list of properties and the mode to which they apply.

To generate the core configuration, use the createConnectorServerCoreConfig action on the system endpoint. Include at least the RCS type (remoteConnectorClient) and the systemType in the JSON payload. The systemType is always provisioner.openicf, regardless of the RCS type:

Create a core RCS configuration (client mode)

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request POST \
--data '{
  "type": "remoteConnectorClient",
  "systemType": "provisioner.openicf"
}' \
"http://localhost:8080/openidm/system?_action=createConnectorServerCoreConfig"
{
  "displayName": "",
  "name": "",
  "enabled": true,
  "usessl": false
}

IDM returns the basic configuration properties for an RCS in client mode. The configuration that is returned is not functional. It does not contain the required configuration property values, such as the name of the RCS.

Use the output returned by the previous example to create your complete RCS configuration. Specify at least the name of the RCS, and use a PUT request on the config endpoint. Note that this step creates an RCS configuration on IDM. The values of these properties must match the RCS configuration, specified in the ConnectorServer.properties file on the RCS:

Create a new RCS configuration (client mode)

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request PUT \
--data '{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "enabled": true,
  "remoteConnectorClients": [
    {
      "displayName": "On premise 1",
      "name": "onprem",
      "enabled": true
    }
  ]
}' \
"http://localhost:8080/openidm/config/provisioner.openicf.connectorinfoprovider"
{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "enabled": true,
  "remoteConnectorClients": [
    {
      "displayName": "On premise 1",
      "name": "onprem",
      "enabled": true
    }
  ]
}

Configure RCS in server mode

Server mode is not compatible with PingOne Advanced Identity Cloud. If you are using Advanced Identity Cloud, configure RCS in client mode instead.

The RCS configuration will differ between server mode and client mode. Refer to RCS Properties for a list of properties and the mode to which they apply.

To generate the core configuration, use the createConnectorServerCoreConfig action on the system endpoint. Include at least the RCS type (remoteConnectorServer) and the systemType in the JSON payload. The systemType is always provisioner.openicf, regardless of the RCS type:

Create a Core RCS Configuration (Server Mode)

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request POST \
--data '{
  "type": "remoteConnectorServer",
  "systemType": "provisioner.openicf"
}' \
"http://localhost:8080/openidm/system?_action=createConnectorServerCoreConfig"
{
  "displayName": "",
  "proxyPassword": null,
  "proxyHost": null,
  "enabled": true,
  "usessl": false,
  "proxyPort": 8080,
  "port": "",
  "name": "",
  "host": "",
  "proxyUser": null,
  "housekeepingInterval": 600,
  "connectionGroupCheckInterval": 60,
  "pingPongInterval": 300,
  "key": "password",
  "webSocketConnections": 2
}

IDM returns the required configuration properties for an RCS in server mode. The configuration that is returned is not functional. It does not contain the specific property values, such as the host name and port of the RCS.

Use the output returned by the previous example to create your complete RCS configuration. Specify at least the host and port of the RCS, and use a PUT request on the config endpoint. Note that this step creates an RCS configuration on IDM. The values of these properties must match the RCS configuration, specified in the ConnectorServer.properties file on the RCS:

Create a New RCS Configuration (Server Mode)

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request PUT \
--data '{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "enabled": true,
  "remoteConnectorServers": [
    {
      "type": "remoteConnectorServer",
      "displayName": "Remote Connector Server 1",
      "proxyPassword": null,
      "proxyHost": null,
      "enabled": true,
      "usessl": false,
      "proxyPort": 8080,
      "port": 8759,
      "name": "rcs1",
      "host": "rcs.example.com",
      "proxyUser": null,
      "housekeepingInterval": 600,
      "connectionGroupCheckInterval": 60,
      "pingPongInterval": 300,
      "key": "Passw0rd",
      "webSocketConnections": 2
    }
  ]
}' \
"http://localhost:8080/openidm/config/provisioner.openicf.connectorinfoprovider"
{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "enabled": true,
  "remoteConnectorServers": [
    {
      "type": "remoteConnectorServer",
      "displayName": "Remote Connector Server 1",
      "proxyPassword": null,
      "proxyHost": null,
      "enabled": true,
      "usessl": false,
      "proxyPort": 8080,
      "port": 8759,
      "name": "rcs1",
      "host": "rcs.example.com",
      "proxyUser": null,
      "housekeepingInterval": 600,
      "connectionGroupCheckInterval": 60,
      "pingPongInterval": 300,
      "key": {
        "$crypto": {
          "type": "x-simple-encryption",
          "value": {
            "cipher": "AES/CBC/PKCS5Padding",
            "stableId": "openidm-sym-default",
            "salt": "3Mq1UJuZXqANx2AzUtbFbg==",
            "data": "4WHBEI3nSVWJ2DfIs2dPZg==",
            "keySize": 16,
            "purpose": "idm.config.encryption",
            "iv": "BvFAQ4sjwJCNY2e7WZPkGw==",
            "mac": "ximBz/BlqC8SEsBTuYQX5Q=="
          }
        }
      },
      "webSocketConnections": 2
    }
  ]
}

Configure failover between RCS servers

For failover purposes, you can configure a group of RCSs, in either server or client mode. Failover is particularly important when you configure an RCS in client mode because IDM has no way of knowing whether the RCS is available.

To prevent the RCS from being a single point of failure, you can specify a list of RCS servers that the connector can target. To set up a failover configuration, you create either a remoteConnectorServersGroup or a remoteConnectorClientsGroup and list the RCS servers. The connector attempts to contact the first RCS in the list. If that RCS is down, it proceeds to the next RCS.

Configure failover for RCS servers in client mode

This example configures a remoteConnectorClientsGroup that lists two remote RCS servers, on hosts remote-host-1 and remote-host-2. The RCS servers are listed by their name property. You can configure multiple groups and multiple servers per group.

First, generate the core configuration to obtain the required properties:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request POST \
--data '{
  "type" : "remoteConnectorClientsGroup",
  "systemType" : "provisioner.openicf"
}' \
"http://localhost:8080/openidm/system?_action=createConnectorServerCoreConfig"
{
   "displayName": "",
   "name": "",
   "serversList": [],
   "algorithm": "failover"
 }

Use the output returned by the previous example to create your RCS group configuration. Use a PUT request on the config endpoint:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request PUT \
--data '{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "enabled": true,
  "remoteConnectorClients": [
    {
      "type": "remoteConnectorClientsGroup",
      "displayName": ".NET Failover Group",
      "name" : "dotnet-ha",
      "algorithm" : "failover",
      "serversList" : [
        {"name": "remote-host-1"},
        {"name": "remote-host-2"}
      ]
    }
  ]
}' \
"http://localhost:8080/openidm/config/provisioner.openicf.connectorinfoprovider"
{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "enabled": true,
  "remoteConnectorClients": [
    {
      "type": "remoteConnectorClientsGroup",
      "displayName": ".NET Failover Group",
      "name": "dotnet-ha",
      "algorithm": "failover",
      "serversList": [
        {
          "name": "remote-host-1"
        },
        {
          "name": "remote-host-2"
        }
      ]
    }
  ]
}

The algorithm can be either failover or roundrobin. If the algorithm is failover, requests are always sent to the first RCS in the list, unless it is unavailable; in which case, requests are sent to the next RCS in the list. If the algorithm is roundrobin, requests are distributed equally between the RCS servers in the list, in the order in which they are received.

Your connector configuration (provisioner.openicf-connectorName.json) references the RCS group, rather than a single RCS. For example, the following excerpt of a PowerShell connector configuration file references the dotnet-ha RCS group created in the previous example:

{
   "connectorRef" : {
     "bundleName" : "MsPowerShell.Connector",
     "connectorName" : "Org.ForgeRock.OpenICF.Connectors.MsPowerShell.MsPowerShellConnector",
     "connectorHostRef" : "dotnet-ha",
     "bundleVersion" : "[1.4.3.0,1.5.0.0)"
   },
   ...
 }

Configure failover for RCS servers in server mode

This example configures a remoteConnectorServersGroup that lists two remote RCS servers, on hosts remote-host-1 and remote-host-2. The RCS servers are listed by their name property. You can configure multiple groups and multiple servers per group.

First, generate the core configuration to obtain the required properties:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request POST \
--data '{
  "type" : "remoteConnectorServersGroup",
  "systemType" : "provisioner.openicf"
}' \
"http://localhost:8080/openidm/system?_action=createConnectorServerCoreConfig"
{
   "displayName": "",
   "name": "",
   "serversList": [],
   "algorithm": "failover"
 }

Use the output returned by the previous example to create your RCS group configuration. Use a PUT request on the config endpoint:

curl \
--header "X-OpenIDM-Username: openidm-admin" \
--header "X-OpenIDM-Password: openidm-admin" \
--header "Accept-API-Version: resource=1.0" \
--header "Content-Type: application/json" \
--request PUT \
--data '{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "enabled": true,
  "remoteConnectorServers": [
    {
      "type": "remoteConnectorServersGroup",
      "displayName": ".NET Failover Group",
      "name" : "dotnet-ha",
      "algorithm" : "failover",
      "serversList" : [
        {"name": "remote-host-1"},
        {"name": "remote-host-2"}
      ]
    }
  ]
}' \
"http://localhost:8080/openidm/config/provisioner.openicf.connectorinfoprovider"
{
  "_id": "provisioner.openicf.connectorinfoprovider",
  "connectorsLocation": "connectors",
  "enabled": true,
  "remoteConnectorServers": [
    {
      "type": "remoteConnectorServersGroup",
      "displayName": ".NET Failover Group",
      "name": "dotnet-ha",
      "algorithm": "failover",
      "serversList": [
        {
          "name": "remote-host-1"
        },
        {
          "name": "remote-host-2"
        }
      ]
    }
  ]
}

{
   "connectorRef" : {
     "bundleName" : "MsPowerShell.Connector",
     "connectorName" : "Org.ForgeRock.OpenICF.Connectors.MsPowerShell.MsPowerShellConnector",
     "connectorHostRef" : "dotnet-ha",
     "bundleVersion" : "[1.4.3.0,1.5.0.0)"
   },
   ...
 }

Secure the connection to the RCS with SSL

The following section does not apply to Advanced Identity Cloud, as it requires filesystem access to your installation.

The SSL configuration for an RCS depends on whether you are running the RCS in server mode or in client mode:

In server mode, IDM initiates the connection to the RCS.

The RCS needs a public/private key pair and a certificate (either self-signed or CA-signed). The RCS sends its certificate to the client (IDM) during the SSL handshake.

If you are using a CA-signed certificate, IDM will trace the certificate back to the root certificate. If you are using a self-signed certificate (or a certificate that depends on an unreachable issuer in the chain from the root certificate), you must import the certificate into the IDM truststore.
In client mode, the RCS initiates the connection to IDM. IDM sends its certificate during the SSL handshake. If you are using the IDM self-signed certificate, you must import the certificate into the RCS truststore.

If you are using TLS Mutual Authentication, the RCS needs a public/private key pair and a certificate. IDM requests the certificate from the RCS during the SSL handshake.

Configure the RCS for SSL

On the RCS, edit the conf/ConnectorServer.properties file to specify a secure connection between IDM and the RCS:

RCS in server mode

Set connectorserver.usessl=true.

Specify the RCS keystore and truststore. For example:

connectorserver.trustStoreFile=security/truststore.pkcs12
connectorserver.trustStoreType=PKCS12
connectorserver.trustStorePass=changeit
connectorserver.keyStoreFile=security/keyStore.pkcs12
connectorserver.keyStoreType=PKCS12
connectorserver.keyStorePass=changeit
connectorserver.keyPass=changeit

RCS in client mode

Connection security is determined by the value of the connectorserver.url property. Use the wss protocol to establish a WebSocket over an encrypted TLS connection; for example, wss://my-tenant.forgeblocks.com/openicf.

The connectorserver.usessl property is not used in client mode.

Specify the RCS keystore and truststore. For example:

connectorserver.trustStoreFile=security/truststore.pkcs12
connectorserver.trustStoreType=PKCS12
connectorserver.trustStorePass=changeit
connectorserver.keyStoreFile=security/keyStore.pkcs12
connectorserver.keyStoreType=PKCS12
connectorserver.keyStorePass=changeit
connectorserver.keyPass=changeit

Configure IDM for SSL

In your conf/provisioner.openicf.connectorinfoprovider.json file, set "usessl" : true.

Generate keys for an RCS in server mode

Generate the RCS private/public key pair and create a new PKCS12 keystore:

keytool \
-genkeypair \
-keyalg EC \
-alias icf-rcs \
-dname "CN=icf.example.com,O=Example Corp,C=FR" \
-keystore rcsKeystore \
-storetype PKCS12 \
-storepass changeit \

Verify the contents of the new keystore:

keytool \
-list \
-v \
-keystore rcsKeystore
Enter keystore password:  changeit
Keystore type: PKCS12
Keystore provider: SUN

Your keystore contains 1 entry

Alias name: icf-rcs
Creation date: Jul 13, 2020
Entry type: PrivateKeyEntry
Certificate chain length: 1
Certificate[1]:
Owner: CN=icf.example.com, O=Example Corp, C=FR
Issuer: CN=icf.example.com, O=Example Corp, C=FR
Serial number: 611e093d
Valid from: Mon Jul 13 23:58:49 SAST 2020 until: Sun Oct 11 23:58:49 SAST 2020
Certificate fingerprints:
SHA1: Fingerprint
SHA256: Fingerprint
Signature algorithm name: SHA256withECDSA
Subject Public Key Algorithm: 256-bit EC key
...

Export the RCS certificate:

keytool \
-export \
-alias icf-rcs \
-file rcs.cert \
-keystore rcsKeystore.pkcs12
Enter keystore password: changeit
Certificate stored in file <rcs.cert>

If you are not using a self-signed certificate, have the certificate signed by a Certificate Authority (CA):

Create a Certificate Signing Request (CSR):

keytool \
-keystore rcsKeystore.pkcs12 \
-certreq \
-alias icf-rcs \
-file rcs.csr

more rcs.csr
-----BEGIN NEW CERTIFICATE REQUEST-----

MIIEKTCCA9QCAQAwVzELMAkGA1UEBhMCRlIxCzAJBgNVBAgTAkZSMQswCQYDVQQH
xZ47rzcY6OrElh8+/TYG50NRqcQYMzm4CefCrhxTm6dHW4XQEa24tHmHdUmEaVys
A1UdDgQWBBSivxV9AzgbrIo3gG6vCBlNaXf3wjANBglghkgBZQMEAwIFAANAADA9
...
AhxL791/ikf1hqxOD3uttV7qumg+TNednsgtk6uOAh0AlINk+1LBeyUkQA7iUHy/
3KLYWog/Npu5USdCeA==

-----END NEW CERTIFICATE REQUEST-----

Submit the CSR to your CA for signature.

Import the signed certificate into the RCS keystore:

keytool \
-importcert \
-trustcacerts \
-file rcs.cert \
-keystore rcsKeystore.pkcs12 \
-storetype pkcs12 \
-alias icf-rcs
Enter keystore password: changeit
Certificate reply was installed in keystore

If your CA certificate is not trusted, you might need to import the CA certificate into the keystore too.

Import the RCS certificate into the IDM truststore:

keytool \
-import \
-alias icf-rcs \
-keystore /path/to/openidm/truststore \
-file rcs.cert
Enter keystore password: changeit
Owner: CN=icf.example.com, O=Example Corp, C=FR
Issuer: CN=icf.example.com, O=Example Corp, C=FR
Serial number: 611e093d
Valid from: Fri Apr 05 16:04:04 CEST 2019 until: Mon Aug 17 16:04:04 CEST 2020
Certificate fingerprints:
MD5:  Fingerprint
SHA1: Fingerprint
SHA256: Fingerprint
Signature algorithm name: SHA256withRSA
Subject Public Key Algorithm: 2048-bit DSA key
Version: 1
Trust this certificate? [no]:  yes
Certificate was added to keystore

Generate keys for an RCS in client mode

Generate the RCS private/public key pair and create a new PKCS12 keystore:

keytool \
-genkeypair \
-keyalg EC \
-alias icf-rcs \
-dname "CN=icf.example.com,O=Example Corp,C=FR" \
-keystore rcsKeystore \
-storetype PKCS12 \
-storepass changeit \

Verify the contents of the new keystore:

keytool \
-list \
-v \
-keystore rcsKeystore
Enter keystore password:  changeit
Keystore type: PKCS12
Keystore provider: SUN

Your keystore contains 1 entry

Alias name: icf-rcs
Creation date: Jul 13, 2020
Entry type: PrivateKeyEntry
Certificate chain length: 1
Certificate[1]:
Owner: CN=icf.example.com, O=Example Corp, C=FR
Issuer: CN=icf.example.com, O=Example Corp, C=FR
Serial number: 611e093d
Valid from: Mon Jul 13 23:58:49 SAST 2020 until: Sun Oct 11 23:58:49 SAST 2020
Certificate fingerprints:
SHA1: Fingerprint
SHA256: Fingerprint
Signature algorithm name: SHA256withECDSA
Subject Public Key Algorithm: 256-bit EC key
...

Export the RCS certificate:

keytool \
-export \
-alias icf-rcs \
-file rcs.cert \
-keystore rcsKeystore.pkcs12
Enter keystore password: changeit
Certificate stored in file <rcs.cert>

If you are not using a self-signed certificate, have the certificate signed by a Certificate Authority (CA):

Create a Certificate Signing Request (CSR):

keytool \
-keystore rcsKeystore.pkcs12 \
-certreq \
-alias icf-rcs \
-file rcs.csr

more rcs.csr
-----BEGIN NEW CERTIFICATE REQUEST-----

MIIEKTCCA9QCAQAwVzELMAkGA1UEBhMCRlIxCzAJBgNVBAgTAkZSMQswCQYDVQQH
xZ47rzcY6OrElh8+/TYG50NRqcQYMzm4CefCrhxTm6dHW4XQEa24tHmHdUmEaVys
A1UdDgQWBBSivxV9AzgbrIo3gG6vCBlNaXf3wjANBglghkgBZQMEAwIFAANAADA9
...
AhxL791/ikf1hqxOD3uttV7qumg+TNednsgtk6uOAh0AlINk+1LBeyUkQA7iUHy/
3KLYWog/Npu5USdCeA==

-----END NEW CERTIFICATE REQUEST-----

Submit the CSR to your CA for signature.

Import the signed certificate into the RCS keystore:

keytool \
-importcert \
-trustcacerts \
-file rcs.cert \
-keystore rcsKeystore.pkcs12 \
-storetype pkcs12 \
-alias icf-rcs
Enter keystore password: changeit
Certificate reply was installed in keystore

If your CA certificate is not trusted, you might need to import the CA certificate into the keystore too.

Import the RCS certificate into the IDM truststore:

keytool \
-import \
-alias icf-rcs \
-keystore /path/to/openidm/truststore \
-file rcs.cert
Enter keystore password: changeit
Owner: CN=icf.example.com, O=Example Corp, C=FR
Issuer: CN=icf.example.com, O=Example Corp, C=FR
Serial number: 611e093d
Valid from: Fri Apr 05 16:04:04 CEST 2019 until: Mon Aug 17 16:04:04 CEST 2020
Certificate fingerprints:
MD5:  Fingerprint
SHA1: Fingerprint
SHA256: Fingerprint
Signature algorithm name: SHA256withRSA
Subject Public Key Algorithm: 2048-bit DSA key
Version: 1
Trust this certificate? [no]:  yes
Certificate was added to keystore

Export the IDM self-signed certificate:

keytool \
-export \
-alias openidm-localhost \
-keystore keystore.jceks \
-storetype jceks \
-file idm.cert \
Enter keystore password: changeit
Certificate stored in file <idm.cert>

Import the IDM self-signed certificate into the RCS truststore:

keytool \
-import \
-alias openidm-localhost \
-keystore /path/to/rcs/security/truststore.pkcs12 \
-storetype pkcs12 \
-file idm.cert
Enter keystore password: changeit

Owner: CN=openidm-localhost, O=OpenIDM Self-Signed Certificate, OU=None, L=None, ST=None, C=None
Issuer: CN=openidm-localhost, O=OpenIDM Self-Signed Certificate, OU=None, L=None, ST=None, C=None
Serial number: 16981c79d8d
Valid from: Wed Feb 13 15:35:36 CET 2019 until: Thu Mar 15 15:35:36 CET 2029
Certificate fingerprints:
MD5:  fingerprint
SHA1: fingerprint
SHA256: fingerprint
Signature algorithm name: SHA512withRSA
Subject Public Key Algorithm: 2048-bit RSA key
Version: 3
Trust this certificate? [no]:  yes

Certificate was added to keystore

ICF 1.5.20.25

Configure a remote connector server RCS

RCS configuration properties

ICFServlet configuration options

Configure RCS in client mode

Configure RCS in server mode

Configure failover between RCS servers

Secure the connection to the RCS with SSL

Configure the RCS for SSL

Configure IDM for SSL

Generate keys for an RCS in server mode

Generate keys for an RCS in client mode